Free tools for your workshop
Calculators you can use today, free and without an account. Nothing you type leaves your browser.
Cut list calculator
Type your parts and a board size: see the boards you need, the layouts and the offcuts.
OpenStair calculator
Floor-to-floor height and space in: steps, rise, going and pitch out, drawn to scale.
OpenGear generator
Spur, helical, rack, ring gear or sprocket in: the profile to scale and its dimensions out.
OpenGear ratio calculator
Up to five gear pairs and a motor in: the total ratio, output speed and torque out.
OpenBike gear calculator
Chainrings, cassette and wheel in: every gear as speed, gear inches or development out.
OpenMilling calculator
Material, cutter and cut in: spindle speed, feed, removal rate and power out.
OpenTurning calculator
Material, insert and cut in: spindle speed, feed rate, power, finish and time per pass out.
OpenFacing calculator
Diameter, feed and cutting speed in: the time across the face and the spindle speed down to the centre out.
OpenMetal removal rate calculator
Milling, turning or drilling: material removed per minute, chips per hour and the power it takes.
OpenMachining power calculator
Milling, turning or drilling against your spindle: power, torque, load and the feed it can carry.
OpenSurface finish calculator
Feed and nose radius in: the Ra, Rz and N grade the cut leaves, and the feed for your target.
OpenChip thinning calculator
Narrow cut, lead angle or ball nose: the feed per tooth that keeps the chip as thick as it should be.
OpenDepth of cut calculator
Material, end mill and operation in: a starting ap and ae, and the passes to reach the depth.
OpenKnurling calculator
Pitch and diameter in: the blank to turn so the knurl tracks, and the diameters either side.
OpenTrue position calculator
Nominal and measured position in: true position, MMC or LMC bonus, and pass or fail.
OpenBar cutting optimizer
Pieces and stock lengths in: the bars to buy, each cutting pattern, the waste and the offcuts.
OpenMetal weight calculator
Shape, sizes and material in: weight per metre, per piece and in all, and the surface to paint.
OpenHardness converter
Rockwell C, Rockwell B, Vickers or Brinell in: the same steel hardness on the other scales out.
OpenFilament length and weight converter
Length in, grams out (or back): metres on a spool, what is left and what a print costs.
OpenStepper motor Vref calculator
The voltage to set on each driver's potentiometer, from the motor current and the sense resistor.
OpenScrew hole calculator
The hole to model for a metric screw, tap or insert, with the counterbore and the nut trap.
Open