Free tool
Milling speeds and feeds
Pick the material and the end mill, set the width and depth of cut and your machine's limits, and get the numbers to program. Nothing is sent anywhere.
The cutter seen from above, feeding up: width of cut 3 mm, in the material over 66°
- Spindle speed
- 9,549 rpm
- Table feed
- 3,126 mm/min
- Feed per tooth
- 0.109 mm
- Removal rate
- 93.8 cm³/min
- Spindle power needed
- 2.81 kW
- Torque
- 2.24 N·m
- Cutting speed at that rpm
- 300 m/min
- Average chip thickness
- 0.056 mm
- Chip thinning factor
- × 1.09
- Engagement angle
- 66°
- Power at the cutter
- 2.24 kW
Starting values for a square end mill in a rigid set-up. Below half the diameter the feed per tooth is raised so the chip keeps its thickness (radial chip thinning). Power is estimated from the material's specific cutting force with 80 % spindle efficiency. Check your cutter supplier's data before you cut.
Sell machined parts made to order
With Customazy your customers set the size, material and quantity of a part on your website and see its price at once. You receive the order with the drawing and a work order for the machine.