IndustriesFurniture and cabinets

Sell furniture made to measure

Customers set the size, board and finish of a wardrobe or a shelf and see the price at once. You get the cut list, the edge banding and the board layout with every order.

What you can sell

  • Wardrobes and built-in cabinets
  • Kitchen units and fronts
  • Shelves and shelving systems
  • Cut-to-size panels for DIY customers
Every panel on the cut list
Sizes, edge banding and drilling travel from the configurator to the workshop without retyping.
Less board wasted
Nesting lays every order out on full boards before it reaches the saw.
Customers see the result
The 3D preview shows the size and decor they chose, before they order.
Free tool

Cut list calculator

Type your parts and a board size: see the boards you need, the layouts and the offcuts.

From order to cut list

Follow one wardrobe through the panel: the same data goes from the configurator to the saw.

  1. Build the product once

    Set the sizes, decors, edge banding and cut-outs a customer can choose, with their limits and prices.

  2. Customers size it and see the price

    The configurator checks every size and shows the price line by line as the customer changes the board or the edges.

  3. Your boards in one list

    Chipboard, MDF, plywood and edge bands with sheet size, grain direction, price, waste allowance and stock.

  4. Every order nested on full sheets

    Nesting lays the parts of open orders out on boards, so the saw cuts more parts from fewer sheets.

  5. Offcuts used again

    Leftovers big enough to reuse are kept with their size, and the next nesting run cuts from them before new sheets.

  6. The order on the shop floor

    Each order becomes a work order with its routing, priority, due date and progress through the operations.

Questions from cabinet makers

Do I need a CNC machine?

No. A shop with a panel saw or a beam saw works from the same cut lists and board layouts. A CNC router is one more place the parts can go.

Which boards and edge bands can I use?

Chipboard, MDF, plywood and edge bands, each with its sheet size, grain direction, price, waste allowance and stock. You set them up once in the materials list.

Does it write the program for my CNC router?

No, it does not create G-code. It prepares the parts, the nesting on full boards and the work order; your CAM software makes the machine program from them.

Which plan do I need?

Start on Free to build a configurator and sell online. Work orders, nesting and offcuts come with Professional, at €149 a month without VAT.