Free tool

Metal removal rate calculator

Pick milling, turning or drilling, the material and your cut, and see how much comes off per minute, how long the stock takes and what it asks of the spindle. Nothing is sent anywhere.

Process
Material and cut

The width of cut is how far the cutter steps over, the depth how far it goes down. The feed per tooth sets the chip, which sets the cutting force.

Removal rate
45 cm³/min
In inches
2.75 in³/min
Chips per hour
21.2 kg/h
Time for 100 cm³
2.2 min
Spindle power
3.8 kW

Your cuts side by side

Milling45 cm³/min
Turning110 cm³/min
Drilling18.8 cm³/min
Chip thickness
0.031 mm
Cutting force (kc)
4,050 N/mm²
Power at the cut
3.04 kW

Removal rate is the cross-section of the cut times how fast it moves. The power comes from the material's cutting force at the chip thickness of the cut, with 80% of the motor's power reaching the cut. The cutting forces are typical values for each material group, a starting point rather than a supplier's figures.

Milling speeds and feeds · Turning speeds and feeds

Price machined parts as your customers order them

With Customazy your customers set the sizes and material of a part on your website and see the price at once, worked out from your own rates. You receive the order with the part already drawn.