Free tool

Turning speeds and feeds

Pick the material and the insert, set the bar's diameter, the depth and feed of the pass and your lathe's limits, and get the numbers to program. Nothing is sent anywhere.

Material and insert
Insert
The bar and the pass
Your lathe

Choosing a material or an insert fills in a cutting speed and feed to start from. Change them to your supplier's figures if you have them. Spindle power 0 skips the power check.

The bar seen from the side, turned towards the chuck: from Ø 50 mm to Ø 46 mm

Spindle speed
1,401 rpm
Feed rate
350 mm/min
Removal rate
110 cm³/min
Spindle power needed
5.51 kW
Torque
30.1 N·m
Time for the pass
17 s
Cutting speed at that rpm
220 m/min
Chip thickness
0.249 mm
Surface roughness Ra
2.44 µm
Surface roughness Rz
9.8 µm
Diameter after the cut
Ø 46 mm
Power at the insert
4.41 kW

Starting values for external turning on a rigid lathe with a short overhang. Power is estimated from the material's specific cutting force with 80 % spindle efficiency; the roughness is the theoretical one from the feed and the nose radius, so expect a little more. Check your insert supplier's data before you cut.

Sell turned parts made to order

With Customazy your customers set the diameter, length, material and quantity of a part on your website and see its price at once. You receive the order with the drawing and a work order for the lathe.