Free tool

Bar cutting optimizer

List the pieces to cut from steel bar, tube or profile and the lengths it comes in. See how many bars to buy, how to cut each one, and what is left over. Nothing is sent anywhere.

Stock bars
Pieces to cut
NameLength (mm)QtyRemove

The kerf is the width your saw takes: about 1.5–3 mm on a band saw, 2–3 mm on a cold saw, more on an abrasive disc. The end trim squares the bar's factory end. Offcuts at least the length you keep go back on the rack; shorter ones count as waste.

6 bars

6 × 6,000 mm

98.3% of the steel bought ends up in the pieces.

No plan can do it in fewer: the pieces and their cuts need at least 6 bars of 6,000 mm.

Steel to buy
36 m
In the pieces
35.4 m
Kerf, trim and scrap
0.6 m
Offcuts kept
—

How to cut the bars

3 × 6,000 mm

2,4002,400860

Post 2,400 + Post 2,400 + Brace 860 + Cleat 320 · left over 0 mm

1 × 6,000 mm

1,1501,150860860

Rail 1,150 + Rail 1,150 + Brace 860 + Brace 860 + Cleat 320 + Cleat 320 + Cleat 320 + Cleat 320 + Cleat 320 + Cleat 320 · left over 20 mm

1 × 6,000 mm

1,1501,1501,1501,150860

Rail 1,150 + Rail 1,150 + Rail 1,150 + Rail 1,150 + Brace 860 + Cleat 320 · left over 192 mm

1 × 6,000 mm

1,1501,150860860860860

Rail 1,150 + Rail 1,150 + Brace 860 + Brace 860 + Brace 860 + Brace 860 · left over 232 mm

The plan packs the longest pieces first and fills each bar with the mix of pieces that leaves least over, then tries every stock length; it is close to the best but not proven the best on long lists. Each piece takes its length plus one kerf, and the last piece on a bar needs no cut after it. Measure your saw's real kerf for tight plans.

Sheet cut list · Metal removal rate · Turning calculator

Sell steel cut to length

With Customazy your customers choose the profile, the lengths and the quantities on your website and see the price at once. You receive the order with the cut list ready.