Free tool

Knurling calculator

A knurl only comes out clean when the part's circumference holds a whole number of teeth. Enter the wheel and the diameter you want, and see the diameter to turn before knurling. Nothing is sent anywhere.

Pattern
Method
The wheel
Pitch given as
The part

The pitch is marked on the wheel (DIN 82: 0.5 to 1.6 mm; inch wheels in TPI). Standard diagonal and diamond wheels have their teeth at 30°. Smaller parts and softer metals take a finer pitch.

Turn the blank to 19.348 mm

for a 19.848 mm knurl with 54 teeth that tracks.

20 mm holds 54.41 teeth: the wheels would land 0.41 of a tooth off after one turn and can double track. Use a diameter below instead.

OptionTeethKnurledBlankUse
A tooth less5319.48 mm18.98 mm
Nearest5419.848 mm19.348 mm
A tooth more5520.215 mm19.715 mm
Pitch around the part
1.155 mm
Pitch across the teeth
1 mm
Tooth depth
0.5 mm
54Teeth
Left: the part from its end, 54 teeth that meet after one turn. Right: a patch of the diamond surface, unrolled.

The teeth sit p / cos β apart around the part, so the knurled diameter is n · p / (π · cos β) for a whole number n. Form knurling pushes the metal up, so the blank is turned about half a pitch smaller (DIN 82); the real growth varies with the material and the pressure, so try a part and adjust. Cut knurling removes metal: turn to the knurled diameter.

Turning calculator · Surface finish · Hardness converter

Sell turned parts made to order

With Customazy your customers choose the material, the sizes and the finish of a part, knurl included, on your website and see its price at once. You receive the order with the part already drawn.