Free tool

Gear ratio calculator

Chain up to five gear pairs, enter your motor’s speed and torque and see what comes out at the end, stage by stage. Nothing is sent anywhere.

  1. Stage 13 : 1
  2. Stage 24 : 1

Each stage’s driven gear sits on the same shaft as the next stage’s driver. Up to 5 stages; a cut spur gear pair runs at about 98 %.

Whole train

Ratio
12 : 1
Output speed
250 rpm
Output torque
6 N·m
Output turns
Same way as the input

Stage by stage

StageRatioSpeed outTorque out
Stage 1 Open in generator →3 : 11,000 rpm1.5 N·m
Stage 2 Open in generator →4 : 1250 rpm6 N·m

Ratio = driven teeth ÷ driver teeth, multiplied over the stages. Speed is divided by the ratio and torque multiplied by it, less the losses when they are counted. Each pair of external gears turns the other way. Check that the gears of a stage share a module before you make them.

Sell gears made to order

With Customazy your customers enter the teeth, module and bore on your website and see the gear and its price at once. You receive the order with the part already drawn.