Free tool

True position calculator

Enter where a hole or pin should be and where it was measured, with its position tolerance and, at MMC or LMC, its size. See its true position, the bonus it earns and whether it passes. Nothing is sent anywhere.

Feature
Modifier
Measured in
Unit
Nominal position
Measured position
Position tolerance
Hole size

Take the tolerance from the position frame on the drawing (⌀0.2 Ⓜ is 0.2 at MMC) and the size limits from the feature's size tolerance. Coordinates are from the datums the frame names.

Pass

True position ⌀0.206 mm against ⌀0.24 mm allowed.

Passes thanks to the 0.04 mm bonus: against ⌀0.2 mm alone it would fail.

True position
⌀0.206 mm
Allowed
⌀0.24 mm
Bonus
0.04 mm
XY
Zone with the bonusTolerance alone The ⌀0.24 mm zone around the nominal axis, and the measured axis +0.09 mm in X and -0.05 mm in Y: a true position of ⌀0.206 mm.
Deviation in X
+0.09 mm
Deviation in Y
-0.05 mm
Distance off nominal
0.103 mm
Direction (from +X)
330.9°
Maximum material size
10 mm
Virtual condition
9.8 mm

True position is twice the distance from the nominal axis: 2 · √(dx² + dy²), with dz² in 3D. At MMC the zone grows by how far the size has moved off its maximum material size (a hole bigger, a pin smaller); at LMC the other way round. The virtual condition is the gauge size: the smallest hole minus the tolerance, or the largest pin plus it. A check at one cross-section; a CMM reports along the whole axis.

Surface finish · Milling calculator · Hardness converter

Sell parts made to your customers' drawings

With Customazy your customers choose the material, the sizes and the tolerances of a part on your website and see its price at once. You receive the order with the part already drawn.