Free tool
Gear generator
Pick a spur or helical gear, a rack, an internal ring gear or a chain sprocket, type its numbers and see it drawn to scale as you type. Nothing is sent anywhere.
This gear cannot be made as entered
- 10 teeth are undercut at 20°: the cutter takes away the bottom of each flank. Use at least 17 teeth, a larger pressure angle or a positive profile shift.
- Pitch diameter
- 20 mm
- Tip diameter
- 24 mm
- Root diameter
- 15 mm
- Circular pitch
- 6.28 mm
- Base diameter
- 18.79 mm
Gear pair
- Centre distance
- 50 mm
- Gear ratio
- 1 : 4
- Contact ratio
- 1.54
A standard full-depth spur gear (ISO 21771): addendum 1 m, dedendum 1.25 m. The root fillet is not drawn. Two gears mesh when they have the same module and pressure angle; check the centre distance and backlash before you cut.
Sell gears made to order
With Customazy your customers enter the teeth, module and bore on your website and see the gear and its price at once. You receive the order with the part already drawn.