
A part cut to the wrong size is paid for twice: once in material and once in time. Most of those mistakes are a question nobody asked. These are the questions to settle before the saw starts, and the reason to put them in the order form rather than in an e-mail.
Is it the finished size or the opening?
A door for a 600 mm cabinet is not 600 mm wide. A wardrobe for an alcove of 1200 mm needs room to go in. Ask whether the size is the part itself or the space it goes into, and who measured it. Walls are rarely square: an opening measured in three places, with the smallest size used, saves a part that does not fit.
Which way does the grain run?
On wood and on decors with a grain, a part turned on the board looks wrong next to its neighbours. Ask which side is the length of the grain, and whether a set of fronts should run through from one to the next.

Which edges, and with what?
Ask which edges are banded, and in which thickness and colour. A shelf against a wall needs one edge, a shelf in the open needs all four, and a customer rarely thinks to say which.
Holes, cut-outs and from which edge
Hinge holes, shelf pins, cut-outs for a sink: each needs a position and the edge it is measured from. Left and right parts are mirror images, and a list that says "2 × side" may mean two of the same or a pair.
- Finished size or opening, and who measured
- Material, thickness and the direction of the grain
- The edges to band, and with which band
- Holes and cut-outs, measured from a named edge
- Left and right parts, and how many of each
- Delivery: stairs, doors and lifts on the way in
Will it get through the door?
A worktop of three metres that does not turn on the stairs is a cut you make on site, or a part you take back. Ask how it gets in, and whether it should be delivered in pieces or flat-packed.
Ask once, in the form
Every question here can be a field of the order: a choice for the grain, a box per edge, a position for each hole. The customer answers before ordering, and the answers arrive in the work order instead of in an e-mail thread.